The ST167N is intended for detection and localization of the following signal sources:
‑ Cellular standards: GSM 900/B8, 1800/B3; 3G (450/B31, 900/B8, 2100/B1); 4G (800/B20, 1500/B32, 1800/B3, 2300/B40, 2600/B7/B38); 5G (3500/B78).
‑ Wireless data transmission: 2.4 GHz / 5 GHz WLAN, Bluetooth, 4G‑800, 4G‑2600.
‑ Micro‑cellular wireless standard DECT.
These devices are hereinafter referred to as DRT (Digital Radio Transmitters).
Signals can be visualized in Waterfall display mode. Base‑station signal‑level indication is also supported.
For ART (Analog Radio Transmitters), the unit can perform frequency measurement, AM/FM demodulation and signal‑source localization. Users may configure detection thresholds, scanning ranges and audio monitoring for demodulated signals.
‑ 24/7 radio‑environment monitoring; detected‑signal data is saved to the unit’s non‑volatile memory.
‑ Preselector for spurious‑signal suppression.
‑ Spectrogram display for supported standards including channel separation for 3G/4G/5G, WLAN and DECT.
‑ The supporting «ST167N Analyzer» software expands configuration, visualization and data‑storage capabilities.
SPECIFICATIONS
Item | Parameter |
3.1 Frequency range, MHz | 50‑9000 MHz |
3.2 Threshold sensitivity, dBm | ‑95 (100‑6000 MHz) |
3.3 Analysis bandwidth, MHz | 1 MHz, 8 MHz, 20 MHz |
3.4 Spurious‑signal rejection, min. dB | 30 dB |
3.5 Display | Color TFT, 160×128 pixels |
3.6 Internal power source | Li‑polymer battery 3.6 V, 2.2 Ah |
3.7 Max. current consumption, mA | ≤ 350 mA |
3.8 Main‑unit dimensions, mm | 90 × 54 × 21 mm |
3.9 Package dimensions, mm | 156 × 140 × 36 mm |
COMPLETE SET
Delivery scope includes:
1. Main receiver unit
2. Two HF antennas
3. USB data cable
4. Charger / power‑supply adapter
5. USB flash drive containing software and this technical‑description‑and‑operation manual